Tag Archives: 2013

2013 PRO CLUTCH HEWITT INERTIA DYNO

2013’ (30, 35, 40 HP) “PRO” CLUTCH INERTIA DYNO-(YOUR CHOICE OF 3 SIZES, INCLUDES HIGHER QUALITY FLYWHEEL DESIGNED FOR ELECTRIC START.)

$5999.99

  1. INCLUDES 1.5”, 1.75” or 2” COMPUTER BALANCED “PRO” FLYWHEEL ASSEMBLY ON 1 ¾” STRESS-PROOF AXLE WITH NTN ULTRA CLASS BEARINGS WITH (1) SPROCKET HUB WITH SPROCKET AND CHAIN GUIDE.
  2. INCLUDES COMPLETE ADJUSTABLE HEIGHT CONTROL STAND AND COMPLETE DYNO TABLE WITH ALL PARTS EXCEPT COMPUTER SYSTEM AND MOTOR MOUNT.
  3. THIS IS POWDER COATED!
  4. INCLUDES FULLY EXPANDABLE “PRO” DATA SYSTEM WITH S.A.E. WEATHER CORRECTION, 4 CHANNELS OF TEMP MEASUREMENT WITH SENSORS, PREMIUM FLYWHEEL SENSOR, And EXTENDED LENGTH LEADS FOR DYNO ROOMS. ENGINE RPM LEADS, INDUCTIVE RPM PICK-UP RPM CLAMP & BOX SO YOU CAN DYNO CLUTCHES AND SEE ENGINE RPM AS YOU TEST.
  5. INCLUDES COMPLETE CRATING OF DYNO, WHICH IS FULLY ENCLOSED IN WOOD CRATE FOR SHIPPING PURPOSES.
  6. INCLUDES UP TO 2 HOURS OF TRAINING BY PHONE AND ANSWER YOUR FOLLOW UP QUESTIONS.

RECCOMENDED OPTIONS

  1. EXTRA SPROCKET HUB WITH SECOND #219 OR #35 SPROCKET-ADD $89.99-CLUTCH DYNOS ARE HARD ON SPROCKET HUBS!
  2. 12” EXTENSION OF DYNO TABLE AND ADD SECOND SET OF MOTOR MOUNT RAILS FOR EASY SET-UP OF OTHER ENGINES-ADD $144.99

OTHER OPTIONS

1.     USED OFF LEASE DESKTOP COMPUTER (1 YR. WARRANTY), WINDOWS XP PRO (SP3) WITH KEYBOARD AND OPTICAL MOUSE-ADD $149.99
2.     17.3” ACER LAPTOP OR? , DUAL CORE, 4 GB RAM, LARGE HARD DRIVE, 3 USB PORTS, WINDOWS 7, 64 BIT, WITH OPTICAL MOUSE-ADD$525.00
3. CUMMINS COMPLETE ELECTRIC START SYSTEM-THIS REALLY CRANKS! INCLUDES EVERYTHING EXCEPT BATTERY-INCLUDES EXTRA TABLE CROSSMEMEBER, FASTENERS, BEARING, LABOR, AND MAGNETO GROUND SWITCH WITH STARTER RELAY SYSTEM. ETC. ADD $999.99
4.     2013’ 50MM BELT DRIVE SYSTEM-LOWER INITIAL COST AND CHEAPER IN THE LONG RUN, INCLUDES (2) BELTS, 4 CYCLE ENGINE SPROCKET IN ¾” I.D.  AND LOWER 144 TOOTH SPROCKET WITH QD HUB-ALLOWS MORE RATIOS FOR DIFFERENT ENGINES. –ADD $799.99
5.     AIR/FUEL RATIO INCLUDES DUAL POWER TRANFORMER AND WITH ALL CABLES AND (3) EXTRA 18MM BUNGS. –ADD $499.99
6.     STUSKA WATER BRAKE (UP TO 200 HP LOAD) OR HYDRAULIC LOADING SYSTEM (UP TO 110 HP) – CALL FOR CUSTOM QUOTES?
7.     UP TO 60 HP HYDRAULIC LOADNG SYSTEM WHICH IS ELECTRICALY CONTROLLED (OFF/0N) (MORE/LESS LOAD) OUTSIDE OF DYNO ROOM. FOR BREAKING IN ENGINES OR HEATING THEM TO CERTAIN TEMPS FOR TESTING OR USED IN CONJUCNTION WITH AIR/FUEL RATIO OR FUEL FLOW MEASUREMENT. ADD-$3699.99.

Free-Quote

2013 ECONOMY INERTIA DYNO (24 HP FLYWHEEL)

FOR CLONES, HONDA’S, BRIGG’S FLATHEADS & ANIMALS, & QUARTER MIDGET MOTORS

$3999.99, (KIT PRICE: $3199.99)

  1. INCLUDES 24 HP FLYWHEEL ON 1 ¼” STRESS-PROOF AXLE WITH ISO 9001 BEARINGS. INCLUDES (1) H.D. SPROCKET HUB WITH PLASTIC CHAIN GUIDE, #53 SPROCKET WITH BOLTS AND FLANGE NUTS. OPTIONAL NTN ULTRA CLASS BRGS, ADD $110.00.
  2. INCLUDES ADJUSTABLE HEIGHT CONTROL STAND WITH COMPLETE BRAKE SYSTEM, THROTTLE CABLE, FASTENERS, ALL PARTS, AND COMPLETE DYNO TABLE NOT POWDER COATED. OPTIONAL POWDER COAT, ADD$235.00.
  3. INCLUDES “NEW” MINI-USB DATA SYSTEM WITH TWO CHANNELS OF TEMP WITH SENSORS.  S.A.E. WEATHER CORRECTION, PREMIUM FLYWHEEL SENSOR, “PRO” SOFTWARE, POWER SUPPLY, USB CABLE, NEODIMIUM MAGNETS. WILL WORK WITH ALL COMPUTERS WINDOWS BASED. AIR/FUEL RATIO can not be added to this system, need to buy basic “PRO” data system to add air/fuel ratio. OPTIONAL; ENGINE RPM WIRING, RPM BOX & INDUCTIVE CLAMP-ALLOWS YOU TO DYNO CLUTCHS, ADD$249.99.
  4. QUARTER MIDGET JACKSHAFT/CLUTCH, OPTION-$599.99.

 **YOU WILL NEED TO SUPPLY**

OR THESE ARE ADDITIONAL COSTS THAT I CAN SUPPLY IF YOU WISH?

  1. COMPUTER WITH KEYBOARD & OPTICAL MOUSE OR LAPTOP? OPTIONAL-OFF LEASE XP PRO COMPUTER, 1 YR WARRENTY, ADD $150.00-INCLUDES NEW KEYBOARD & OPTICAL MOUSE
  2. INKJET PRINTER AND CABLE-OPTION- $100.00
  3. PREMIER TITAN CLUTCH WITH 16 TOOTH DRIVER AND BLUE SPRINGS, IF #35 CHAIN.- RECCOMENDED-OPTIONAL, $125.00
  4. MOTOR MOUNT –INTERNATINAL (WIDE) WITH CLAMPS, OPTIONAL, $90.00. FOR BURRIS 3 BOLT SLIDE TYPE (BEST) OR G-MAN RHINO 3 BOLT SLIDE TYPE, $80.00.
  5. USED CRT MONITOR OR NEW LCD 19”+, OPTIONAL, $110.00+.
  6. 110 VOLT SURGE PROTECTOR WITH WIRING THAT IS GROUNDED! (CHECK YOUR WIRING?) OPTIONAL, $29.99
  7. ZIP CODE TO ESTIMATE FRIEGHT COST TO YOU?

 

#1 MOST COMMON ECONOMY DYNO PACKAGE

2-CYCLE & 4-CYCLE DYNO (30HP) ($4999)

INCLUDES SAME FLYWHEEL AS ECONMY DYNO, AXLE, BEARINGS, “POWDER COATED” DYNO TABLE & CONTROL STAND WITH USED DESKTOP COMPUTER (1 YR. WARRENTY), NEW KEYBOARD & OPTICAL MOUSE, WITH NEW 16 TOOTH CLUTCH WITH CORRECT SPRINGS. DYNO IS BOLTED TO PALLET AND FULLY ENCLOSED IN WOODEN CRATE FOR SHIPPING.

OPTIONAL:

  1. IN ORDER TO DYNO CLOSER TO 30-35 HP ENGINES, I RECOMMEND 30 HP FLYWHEEL WITH 1 ¾” AXLE AND BEARINGS.  THIS MAKES EXCELLENT (2-CYCLE DYNO!) OPTIONAL, ADD 35 HP FLYWHEEL, ADD $100.00
  2. NTN ULTRA CLASS BEARINGS, ADD $ 120.00.
  3. AIR/FUEL RATIO, ADD $500.00.
  4. NEW 17.3” LAPTOP, ADD $499.99.
  5. THIS DYNO COMES WITH “Pro” data system with 4 channels of temp, choice of (2) sensors, “Pro” software, No engine rpm leads, pick-up box or inductive Engine Rpm clamp. But you can add air/fuel ratio later with this system.
  6. IF YOU NEED PREMIER CLUTCH, add-$125.00

We have over 200 inertia dynos in U.S., Canada, Australia, & New Zealand. We also offer multi flywheel inertia dynos, Stuska or any brand water brake dynos, and Hydraulic add-on or load systems with either mechanical or electric clutches. We can computerize most hydraulic or water brake and most strain type (eddy current) dynos, etc). We can do chassis dyno or axle dynos. We also do stand alone water brake dynos up to 200 hp for vertical or horizontal engines or both? Call with questions or needs that you have?
PHONE: 641-775-3395
Free-Quote